Major Cyclone Mower

Home >> Implements and Trailers >> Mowers, Rakes & Tedders
Cyclone Mower

The MAJOR Range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.

These machines are strong, rugged and robust; specifically designed for use in set-aside, forestry margin management and sensitive environmental scrubland control. This machine easily copes with the toughest of conditions including shrub, saplings, gorse and brush as well as the clearance of arable stubble, including maize and rapeseed crops.

Strenx™ 700 MC high-strength steel is used in the manufacture of these machines. This material is stronger than steel traditionally used in machinery manufacturing. The undersole discs are produced from Hardox® 450, a wear and abrasion resistant steel.

- Can be front or rear mounted (to be specified at order)
- Patented inter-gearbox drive system
- 25% less power and fuel consumption required than a similar sized flail machine
- Impact shock reducing swinging hardened spring steel blades
- Low maintenance machine with less wearing parts than a flail mower
- Heavy duty rear roller

Machine Specifications

Model: MJ30-200 / MJ30-250 / MJ30-300 / MJ30-350

Overall width: 2.1m (7’) 2.65m (8’9”) / 3.0m (10’) / 3.65m (12') / Tport: 2.50m (8' 2

Cutting width: 2m (6' 5

No. of Blades/Bullets: 12 / 6 16 / 4 12 / 6 20

No. of Rotors: 3 / 4 / 3 / 5

Power (HP): 40 - 100 / 50-120 / 90 - 150 / 110 -180

PTO rpm: 540 / 540 /1000 / 1000

Blade/Bullet speed: 77.5m/s / 75m/s / 77.5m/s / 77.5m/s

Cutting Height: 20-250mm / 20-250mm / 20-250mm / 80-180mm

Weight: 600kg / 785kg / 890kg / 1120kg

Ted Hopkins, St. Brides Wentloog,
Newport. NP10 8SR.