Teagle TOMAHAWK 404M-505M-505XLM BALE PROCESSOR

Home >> Implements and Trailers >> Aeration & Fertilising
TOMAHAWK 404M-505M-505XLM BALE PROCESSOR

Comfortable livestock are more productive.

For straightforward bale processing the 404M/505M/505XLM range offers fast effective milling of straw and miscanthus to a very consistent and fine length.

Operation

Blow straw up to 30', discharge to one or both sides of the tractor. Alternative delivery chutes are available to suit your requirements.

The Tomahawk 404M, 505M and 505XLM Bale Processors use Blades or Hammers to chop dry material until small enough to pass through the holes in a screen. A range of screens are available with holes from 15mm to 36mm to obtain material of a consistent chop length.

Easy control of output by adjusting the speed of drum rotation.

Configurations

Tomahawk 404M - Suitable for 1.2m (4') diameter bales.
Tomahawk 505M - Suitable for 1.5m (5') diameter bales.
Tomahawk 505XLM - Suitable for 1.5m (5') diameter bales and full size Hesston bales.
Various drum extensions are available for ease of operation or to accommodate larger rectangular bales.

The 404M/505M/505XLM range is suitable for dry material only, and will not cut silage as it will block the mill sieve.

British built and backed

For your peace of mind Tomahawks are backed by an efficient after sales service from our production facility in Cornwall, England.

The Tomahawk Drum models are economical, simple and robust. There are no gearboxes, with the drive to the rotor being direct from the tractor, a hydraulic motor is used to rotate the drum. Due to their simplicity and strength, customers can expect a long service life from their Tomahawk.

Machine Specifications

Model: 404M 505M 505XLM

Drum Diameter: 1.57m 1.83m 1.83m

Maximum Round Bale Diameter: 1.2m 1.5m 1.5m

Maximum Rectangular Bale Size: 1.2m x 0.9m 1.2m x 1.2m 1.2m x 1.2m

Height Overall with machine on ground: 2.10m 2.38m 2.78m

Width with chutes closed: 1.85m 2.05m 2.05m

Length Overall: 2.10m 2.10m 3.68m

Weight: 647kg 737kg 1135kg

PTO power required: 80HP 80HP 100HP

Make Enquiry?

If you would like to enquire further about this product please contact us on 01633 680754, or alternative submit the following form

Ted Hopkins, St. Brides Wentloog,
Newport. NP10 8SR.