Wessex STC-120 SCARIFIER COLLECTOR

Home >> Implements and Trailers >> Hedge Cutter & Mower Flail
STC-120 SCARIFIER COLLECTOR

The Wessex ProLine STC is semi-mounted to the tractor to allow the brush to follow the ground contours in work, and be lifted out of work for transport. As the whole machine is not lifted on the linkage, the STC can be operated behind a small tractor with limited lifting capacity.

The machine runs on its own four wheels, totally independent of the tractor. The front wheels are fully castoring and are re-positioned by a simple pin mechanism to adjust the working height, whilst the two rear wheels have flotation tyres to keep turf compaction to a minimum. Power is transmitted from the tractor through a heavy cast gearbox and belt drive to the rotor.

When in scarifying mode, the flails blades are replaced with 2mm verti-cutting knives for a professional scarifying operation. Ideal for sports field work or lawns, the STC scarifyer will leave a clean cut through the turf at approximately 30mm centres.

Machine Specifications

Working width: 1.2m

Overall width (m): 1.6m

Hopper capacity: 1.5m³

Power required: 18hp

Make Enquiry?

If you would like to enquire further about this product please contact us on 01633 680754, or alternative submit the following form

Ted Hopkins, St. Brides Wentloog,
Newport. NP10 8SR.